Printer Cabinet

Possibly my first “big construction” project, this cabinet is built to hold my 3D printer, and my 2 regular printers below it. I used multiple references (see below) to design my own version with input from many different sources, and some parts from others.

To help me, I built this spreadsheet with all the information I could gather, and a plan for what I wanted to do. Hopefully someone finds it useful in the future. ๐Ÿ™‚

Here’s my post on Thingiverseย with some files I used/modified.

Now, here’s a bit of the process from start to finish.

Firstly, off to IKEA to get the 4 LACK Tables. Then, remove all the bottoms of all the legs…ย  except 4 as I later find out luckily not too late.

Needed to make lots of brackets
This was used to drill holes into the table tops for the table joining connectors.
Just like that

One for each corner of the table. The other table’s legs attach to these.
Meanwhile, I was making some side panels that needed painting (chalkboard paint FTW) and plenty of drying time.
Oops, realized they were warping as they dried… my best attempt to fix but they’re still warped to this day :/
I think they came out not half bad looking
Hot glued on some sound dampening foam for some noise reduction ๐Ÿ™‚
Got a nice little pattern going on too
Ok this is a bit later, but basically I attached the legs and then screwed them together more with these (just the joiners alone weren’t super stable; these tightened it up a lot)

Test fit, had to make some minor size adjustments but not half bad. Magnets were glued to the corners of the boards and the red brackets so they can be easily removed if needed.

Not a very good photo (was in the midst of switching to a new phone so some photos are noticeably worse than others) but here’s 3 panels on. Nice and dark ๐Ÿ™‚
Switching gears again, working on cutting the front acrylic door. Making some marks before cutting and drilling holes
:l

Here I tested the blade I had to see just how well it’d cut, so I could avoid ruining this moderately expensive piece
So close to perfect size but nope, gotta be cut
๐Ÿ˜€
Wish that was smoother, but it’s not bad and not very noticeable installed.
I needed a spacer made so that the door (when closed) would sit flush with the side walls. This was modeled in relatively easy.
I do love hot glue (sadly some popped off later… replaced with superglue the ones that did)

Hinges work surprisingly smooth and work better than I expected.

I modded a handle I found online to have my logo ๐Ÿ™‚
Coming together!
The peel was very satisfying
Very pleasing ๐Ÿ˜€

It’s even cat approved!
I have a spare laptop with a busted screen that became my Octoprint laptop, so I made hooks for it to hang off the back out of sight and run the printer.
Yeah not exactly usable. Needed to install Ubuntu on another machine and move the hard drive over. Now it’s managed over SSH and isn’t an issue.
Added some RGB lighting strips I had leftover. Didn’t really know a better way to do this, and I don’t love it, but it works. Suggestions in comments welcome!
Looks kinda blue, but in real life, it’s reasonably white
Fixes the dark issue caused by the panels for sure (actually an old pic, this was to test the layout, looks better in later pics)
Test fitting the printer in
Yikes. That’s only a few months. Good thing I added the filter when I added the custom red LED fan (for quietness and style)
Whoops. Had to flip the cover because it sticks upward. It’s now mounted underneath the table so I need the protrusion facing down now.

Accessible from the left side is the controller tucked up underneath

A bit of a downside is that this printer hits the control box when it’s opened. It also has to sit sideways for the front to be able to open up. Oh well.
And yes, I did clean it later
Horray for things fitting!
I kept my USB desk lamp for better brightness around where it matters

Needed to make a cable cutout ๐Ÿ˜›
Works though!

Yay!
Looking happy in its snug little box. My webcam is also positioned for watching from my desk since it is no longer right next to me.
The printers are happy too
Accessible if needed but mostly ignored and Octoprint is used instead
A view from the other side
Zip tied cables up a bit for a cleaner look

 

And that’s it! Feel free to comment below if I missed any crucial details, if you’re making something similar, have any questions, or want to see anything else. This was quite fun to build and should serve me well for quite a while! ๐Ÿ™‚

 

Cost breakdown:

See spreadsheet for full details

 

References Used:

My Spreadsheet

Thingiverse:ย Ikea Enclosure for Monoprice Maker Select/Wanhao Duplicator i3 by dirtsky

Thingiverse: Ikea Lack Printer Enclosure by LKM

Thingiverse: Balcony Door Handle by cptspiff

Thingiverse: Hinge by airald

Thingiverse:ย IKEA lack table leg extensions and brackets by insidethemindofmatt

Thingiverse: Laptop Wall Mount Bracket by mrsamnc

Thingiverse: IKEA Lack Hidden Bracket by Kasperc88

Thingiverse: lack table leg connector by mpkottawa

Thingiverse: Camera Tripod Screw (1/4″ – 20 UNC) by MasterFX

Instructables: 3D Printer Enclosure from Upcycled Furniture by phatima

Instructables: How to drill through acrylic plexiglass the right and wrong way by thebetatesters

Reddit: What are the physical dimensions of the MP Maker Select v2? by u/reluttr

YouTube: Screwing around with my 3D printer enclosure (IKEA Lack table) by Inside The Mind of Matt

YouTube: Make your own server rack for ยฃ10, using IKEA Lack Table by MrTvTim

Amazon: C920 Webcam by Logitech

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: